News
Current Position： Home
> News
Briefly describe the characteristics of oil mold temperature machine
announcer：
When we choose the mold temperature machine, we actually should pay attention to the heat conduction medium as its first standard. First of all, in fact, it is to decide whether to use thermal oil or water. As long as the mold temperature controller is in a permitted temperature control range, it will be directly based on the good thermal conductivity of water, and the water type will be preferred. The choice of oil-type mold temperature machine is actually to pay attention to many aspects.
First of all, for the oil-type mold temperature machine itself, we actually need to pay attention to its temperature control range, which will actually be between 45°C and 350°C. At this time, we actually will be based on our The required temperature control needs come directly to choose different types of models.
As far as the temperature of the non-closed oil mold temperature machine is concerned, it can actually reach 200 degrees. When considering that some heat transfer media will be at 200 ℃, in fact, the pyrolysis reaction will occur directly. It is precisely because of this, for the mold temperature machine in this series, the thermal decomposition reaction humidity of the heat conduction medium selected for it is actually higher than 200 ℃, avoiding the pyrolysis reaction will cause the decomposed carbon to be locked to our heat medium on the surface.
In this respect, for the oil-type mold temperature machine, it can actually reduce the thermal conductivity of the medium itself to a large extent, and in the end, it will directly make the mold humidity not. It can be controlled relatively well, which actually affects its use effect to a large extent.
The oil-type mold temperature machine is actually based on the fact that the oil is more prone to pyrolysis reaction at high temperature. It is precisely because of this that we should pay attention to it. When the oil temperature is higher than 200 ℃, it is actually Safety measures should be taken to avoid the pyrolysis reaction. When necessary, we actually need to check the flow rate on the heat transfer medium of the oil mold temperature machine.